Check for Deals
Check for Deals
Many shielding products should be grounded or must be grounded! Our professional grounding accessories can serve as a base for these grounding measures.
Please note, grounding must be done by a licensed electrician.
Please do not hesitate to contact us for further advice.
An all in one Grounding kit for interior shielding paint. Applicable for up to 2 walls depending on dimensions. The kit comes with the following: ...
View full detailsAn all in one kit for grounding fabrics to protect against low frequency alternating electrical fields. Contents: 1x GCM Grounding Magnet 1x GPB ...
View full detailsAn all in one kit for grounding fabrics to protect against low frequency alternating electrical fields. Contents: 1x GCS Grounding Screw 1x GPB G...
View full details5.0 / 5.0
1 Review
Grounding cable to connect our grounding components with each other. With crimped cable lugs and shrink hose on both sides. Scope of delivery: Cab...
View full details4.78 / 5.0
9 Reviews
Self-adhesive grounding strap with conductive glue to bridge cracks in the underground for a long-term grounding. The GSX10 can due to the electr...
View full detailsSelf-adhesive grounding strap with conductive glue to bridge cracks in the underground for a long-term grounding. The GSX50 can due to the electr...
View full detailsSmall and flat grounding plate 20x80 mm for installation directly on top of shielding products and grounding straps. For the skirting board area. I...
View full detailsMedium-sized grounding plate 40x80 mm for installation directly on top of shielding products and grounding straps. Next to a wall socket. Installat...
View full detailsStandard grounding plate 80x80 mm for installation directly on top of shielding products and grounding straps. Next to a wall socket. Installation ...
View full detailsMedium-sized surface/flash mounting housing 40x80 mm, for the installation directly on shielding products or for clamping the grounding straps. Wit...
View full detailsStandard-sized surface/flash mounting housing 80x80 mm, for the installation directly on shielding products or for clamping the grounding straps. W...
View full detailsLarge-sized surface/flash mounting housing 120x120 mm, for the installation directly on shielding products or for clamping the grounding straps. Du...
View full detailsGrounding plate with a silvered hook-and-loop fastener “hook”. All our groundable sewed products (canopied, floor mats, blanket, sleeping bag, bedd...
View full details5.0 / 5.0
1 Review
Grounding connection with two plates that hold together with the help of strong magnets. For all electrically conductive fabrics, fleeces, mesh...
View full detailsGrounding connection with two plates that get screwed together. For all electrically conductive fabrics, fleeces, meshes. The two connecting plat...
View full detailsGrounding set for the use with our magnetic shielding film WMF-300. The WMF-300 surface is electrically insulated. Whilst screwing down the cable ...
View full detailsThe stainless steel gauze elements or fleece elements are attached / glued with 5-10 cm overlap. To interconnect all elements, the tape is screwed ...
View full detailsGrounding plug for groundable fabric products like earthing-products, canopies, sleeping bag, bedding, etc. This plug is suitable for portable prod...
View full detailsSocket Tester with GFCI check,Receptacle Tester for Standard AC Outlets. Automatic Electric Circuit Polarity Voltage Detector Breaker Finder Deta...
View full detailsDesigned to detect the most common wiring problems in standard receptacles. Conditions indicated: wiring correction, open ground, reverse polar...
View full detailsStainless steel grounding rod 40 cm for groundable fabric products. This grounding rod is suitable for portable products (canopies Bxx, earthing-pr...
View full detailsFiberFlex RF-AF3: Enhance EMF Shielding with Advanced Fiber Additive FiberFlex RF-AF3 is a high-performance fiber additive engineered to improve th...
View full details